More

For electrical operation this point requires the M14935 Point Motor.

R 2 - 24°. Circle = 15 sections of track

Length 1/1 = 180 mm / 7-3/32". Facilitates transition from K to M track.

Length 217.9 mm / 8-9/16".

Length 200 mm, turnout radius 502,7 mm, turnout angle 22,5°

radius = 358 mm/7.5°.Single-slip turnout bypasses can be made easily with the track sections R2 1/4, and R3 1/4, without departingfrom the Roco LINE grid design.

Track: H0e |Power system: 2L DC Feldbahnweiche left with electric drive. Length of the straight track 104.2 mm, branch angle 24 °, branch radius 194.6 mm. Gauge: 9 mm.

  A complete transformer and speed control unit with built-in control for two separate trains.   Power output is 2 amps with compensation to regularise speed under varying conditions of load.   Positive off rotary speed control cuts all...

Conventional on/off switch for R618 double-isolating track.  Supplied with connecting wires.

For connecting the R8216 Point and Accessory Decoder to the track.

To obtain the best from the Hornby Digital system it is recommended that all points are made ‘live’ by attaching 2 x R 8232 DCC Electric Point Clips to each point. Point clips are already fitted to the points included in the Hornby Digital...

Extend your set in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on your TrakMat scenic underlay sheet Add Extension Pack C to the Starter Oval plus Extension Packs A and B to make this layout...

Each radius 438mm arcs 22.5° and 33.75° Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor'.

Length 168mm x 181mm angle 22.5° For parallel tracks use with 22.5° section curve or point.

3rd Radius 505mm arc 45°

2nd Radius 438mm arc 45°